LINCOLN 1938 - 1967Information subject to change without notification. Confirm at time of ordering.
PRODUCTS AVAILABLE: CONVERTIBLE TOPS, DOUBLE SOLID CURTAIN, FULL VUE (PLASTIC), PADS
ARO patterns have been proven by many "in house" & "field" installations by professional restorers & installation centers for over 70 years. Additionally - ARO was the "OE" manufacturer for GM, FORD, CHRYSLER, & many other auto manufacturers from 1958 - 1995, manufacturing convertible tops, glass, & other items from patterns provided by the auto manufacturers. OE patterns on file with the factory part #'s & specifications.
It is extremely important to set the rear bow height to the proper settings. Your auto could have had many tops installed over the years. Each manufacturer has a bow height which is suitable for their product & may vary from ours. We have suggested installation guide marks on many patterns, as well as suggested or proven bow height suitable to install our products properly.
We offer "GENERIC installation" instructions, based on many years of personal trim installation experience. Each auto has a wide variety of problems, which might be encountered during installation. We recommend Dealer service manual(s) as an excellent guide, with all factory specifications & parts lists. These manuals can be located on the Internet, swap meets, or local car clubs specializing in your model.
We strongly urge the installation of these items be performed by PROFESSIONAL installation centers with the correct tools & experience to handle any conceivable problem which might arise.
Information contained herein is the property ofARO 2000 & may not be reproduced or used without permission.
ARO 2000. All rights reserved.
Revised: September 14, 2017
Call - 845-778-1314, fax 845-778-3968 or email us for additional information
A DIVISION OF PUTT GEORGI LTD.